Yamaha MOXF8 Reference Manual - Page 102
Pattern Mode, F4] PATCH, SF5] CLEAR, SF6] COPY
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE [F4] PATCH From this display, you can assign a Preset Phrase or a User Phrase (recorded in the Pattern Record mode) to each Track and create a Pattern that contains up to 16 Tracks. You can assign a User Phrase created with the currently selected Pattern. If you wish to use User Phrases recorded to Tracks of other Patterns, use the Phrase Data Copy function, selected with the [SF6] COPY button. Phrase Number Determines the Phrase number to be assigned to a Track. You can select one of the 256 User Phrases stored to the selected Pattern. Note that by default the User Phrases have no data. When set to "---," the Track becomes empty. Settings: --- (off), 001 - 256 NOTE The MOXF6/MOXF8 features no Preset Phrase data. Number of Measures Indicates the name of the selected Phrase. Section Shows the Section being currently edited. To change the Section, press the [PATTERN SECTION] button, and then use the Number [1] - [16] buttons. Pressing the [PATTERN SECTION] assigns the Sections A - P to numbers [1] - [16] in sequence. Then, pressing the appropriate Number [1] - [16] buttons lets you change the Section. Meas (Measure) Shows Measure and Beat for current playback location. [SF5] CLEAR This clears the Phrase assignment to the currently selected Track and leaves the Track empty. [SF6] COPY Pattern Mode Pattern Play [F1] PLAY [F2] GROOVE [F3] TRACK [F4] PATCH [F5] REMIX [F6] CHAIN Pattern Record Pattern Record Standby [F1] SETUP [F2] VOICE [F3] ARP ED [F5] CLICK During Pattern Recording [F1] SETUP [F3] RESET [F4] TIE [F5] DELETE [F6] BAK DEL Pattern Edit [F1] CHANGE [F2] VIEW FLT [F5] INSERT [F6] DELETE Pattern Job [F1] UNDO/REDO [F2] NOTE [F3] EVENT [F4] PHRASE [F5] TRACK [F6] PATTERN Supplementary Information Source Pattern number, Phrase number Destination Phrase and Track of the Pattern being currently edited The User Phrases that can be assigned with the Patch function are limited to the ones contained in the currently selected Pattern. This function lets you copy Phrases in another Pattern to the selected one. Press the [SF6] to call up the following display. After setting the parameters as needed, press the [ENTER] to copy the Phrase data. NOTICE Any previous data in the copy destination will be overwritten. Therefore, you should regularly create backup copies of important data on a USB flash-memory device or the like. MOXF6/MOXF8 Reference Manual 102