Yamaha MOXF8 Reference Manual - Page 132
Master Job, F5] KNOB, F1] INIT Initialize, F4] BULK Bulk Dump
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE [F5] KNOB CtrlKnobUp (Control Knob Upper) CtrlKnobLo (Control Knob Lower) From this display you can determine which Control Change numbers are used for the Knobs for each Zone. These settings are available only when the "ZoneKnob" parameter (in the [F3] ZONE SW display in Master Play) is set to "on." Settings: off, 1 - 95 Master Job The Voice Job mode features several basic operations, such as Initialize and Copy. After setting parameters as required in the selected display, press the [ENTER] button to execute the Job. [F1] INIT (Initialize) This function lets you reset (initialize) all Master parameters to their default settings. It also allows you to selectively initialize certain parameters, such as Common settings, settings for each Zone, and so on-very useful when creating a completely new Master from scratch. Type of parameter to be initialized: All, Common, Zone All Common Zone All settings for the selected Master are initialized. Common parameter settings for the selected Master are initialized. The Zone settings are initialized. You can initialize the zone setting to one of the following three types. Split Splits the keyboard range using Zone 1 and Zone 2. "UpperCh" determines the MIDI transmit channel of the upper range of the keyboard, "LowerCh" determines the MIDI transmit channel of the lower range of the keyboard, and "SplitPoint" determines the note (C2 - G8) number which separates the upper range and lower ranges of the keyboard. 4Zone Initializes all four Zones. Layer Lets you layer two parts using Zone 1 and Zone 2. "UpperCh" and "LowerCh" determine the MIDI transmit channels of the two Zones respectively. Master Mode Master Play [F1] PLAY [F2] MEMORY [F3] ZONE SW Master Edit Common Edit [F1] NAME Zone Edit [F1] TRANS [F2] NOTE [F3] TX SW [F4] PRESET [F5] KNOB Master Job [F1] INIT [F4] BULK [F4] BULK (Bulk Dump) This function lets you send all your edited parameter settings for the currently selected Master to a computer or another MIDI device for data archiving. Press the [ENTER] button to execute the Bulk Dump. NOTE In order to execute Bulk Dump, you will need to set the correct MIDI Device Number, with the following operation: [UTILITY] [F6] MIDI [SF1] CH "DeviceNo." MOXF6/MOXF8 Reference Manual 132