Yamaha MOXF8 Reference Manual - Page 149
SF4] OTHER, ClockOut, SeqCtrl Sequencer Control, MTC StartOffset, MIDI IN/OUT, BulkInterval
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE NOTE When setting the MOXF6/MOXF8 so that Arpeggio playback is synchronized to an external MIDI clock, make sure to set the devices so that the MIDI clock from the DAW software/ external MIDI device is properly transmitted to the MOXF6/MOXF8 from the DAW software/ external MIDI devices. ClockOut Determines whether MIDI clock (F8) messages will be transmitted via the MIDI OUT/USB terminal. Settings: off, on SeqCtrl (Sequencer Control) Determines whether Sequencer Control signals - start, continue, stop, and song position pointer - will be received and/or transmitted via MIDI. Settings: off, in, out, in/out off Not transmitted/recognized. in Recognized, but not transmitted. out Transmitted, but not recognized. in/out Transmitted/recognized. MTC StartOffset Determines the specific time code point from which sequence playback starts, when MTC is received. This feature can be used to accurately align playback of this synthesizer with an external MTC-compatible device. Settings: Hour: Minute: Second: Frame Hour: 00 - 23 Minute: 00 - 59 Second: 00 - 59 Frame: 00 - 29 Utility Mode [F1] GENERAL [F2] VOICE [F2] SEQ [F3] VCE A/D [F4] CTL ASN [F5] USB I/O [F6] MIDI Utility Job [SF4] OTHER MIDI IN/OUT Determines which physical output/input terminal(s) will be used for transmitting/receiving MIDI data. Settings: MIDI, USB NOTE The two types of terminals above cannot be used at the same time. Only one of them can be used to transmit/receive MIDI data. BulkInterval Determines the interval time of the Bulk Dump transmission when the Bulk Dump function is used or the Bulk Dump Request is received. Settings: 0 - 900 ms MOXF6/MOXF8 Reference Manual 149