Yamaha MOXF8 Reference Manual - Page 67

VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE RevSend (Reverb Send) Knob Set the stereo pan position for each Part. This lets you make detailed Reverb effect adjustments among the various sounds of the Drum Voice. Settings: 0 - 127 DryLevel Determines the level of the unprocessed (dry) sound of the selected Part, letting you control the overall effect balance among the Parts. Settings: 0 - 127 InsEF (Insertion Effect Part Switch) Determines the Parts available for the Insertion Effect. When this switch is set to on, the Insertion Effect of the Voice assigned to the Part is enabled. Settings: off, on [F3] EQ (Equalizer) From this display you can adjust the EQ settings for each Part. This is a parametric EQ featuring three bands (High, Mid and Low). You can attenuate or boost the level of each frequency band (High, Mid, Low) to change the Voice sound. Note that two different display types listed below are provided and you can switch between them by pressing the [SF6]. Each display type features the same settings in a different format; use the type you feel most comfortable with. • Display showing four Parts Keep in mind that since all the available parameters cannot be simultaneously displayed in the four-Part display, you will need to use the cursor controls to scroll the display in order to see and set the other parameters. • Display showing all parameters for one Part For details about the Effect connection including the EQ in the Performance mode, see page 20. Gain +   0 -  3 bands  Low   Mid  Frequency  High  FREQ (Frequency) Knob Determines the frequency for each frequency band. Settings: Low: 50.1Hz - 2.00kHz Mid: 139.7Hz - 10.1kHz High: 503.8Hz - 14.0kHz  GAIN Knob Determines the level gain for the Frequency (set above), or the amount the selected frequency band is attenuated or boosted. Settings: -12.00dB - +0.00dB - +12.00dB Q Determines the Q (bandwidth) for the Mid band. Settings: 0.7 - 10.3 Performance Mode Performance Play [F1] PLAY [F2] VOICE [F3] PORTA [F4] EG [F5] ARP ED [F6] EFFECT Arpeggio Edit [F1] COMMON [F2] TYPE [F3] MAIN [F4] LIMIT [F5] PLAY FX [F6] OUT CH Performance Edit Common Edit [F1] GENERAL [F2] OUT/MFX [F3] MEQ [F4] USB I/O [F5] A/D IN [F6] EFFECT Part Edit [F1] VOICE [F2] OUTPUT [F3] EQ [F4] TONE [F5] RCV SW Performance Job [F1] INIT [F2] RECALL [F3] COPY [F4] BULK Performance Record [F1] SETUP [F2] REC TR [F3] OTHER [F5] CLICK [F6] INFO Supplementary Information MOXF6/MOXF8 Reference Manual 67