Yamaha MOXF8 Reference Manual - Page 32
Voice Mode, F3] EQ, F4] CTL SET Controller Set, SF1] SET1/2 - [SF3] SET5/6
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE [F3] EQ This is a parametric EQ featuring three bands (High, Mid and Low). You can attenuate or boost the level of each frequency band (High, Mid, Low) to change the Voice sound. FREQ (Frequency) Determines the frequency for each frequency band. Settings: Low: 50.1Hz - 2.00kHz Mid: 139.7Hz - 10.1kHz High: 503.8Hz - 14.0kHz GAIN Determines the level gain for the Frequency (set above), or the amount the selected frequency band is attenuated or boosted. Settings: -12.00dB - +0.00dB - +12.00dB Q Determines the Q (bandwidth) for the Mid band. Settings: 0.7 - 10.3 [F4] CTL SET (Controller Set) [SF1] SET1/2 - [SF3] SET5/6 Since up to six Controller Sets can be assigned to each Voice, three pages (Sets 1/2, Sets 3/4 and Sets 5/6) are available. For details on Controller Set, see page 53. ElmSw (Element Switch) Selects whether the controller will affect each individual Element or not. Settings: Elements 1 to 8 enabled ("1" to "8") or disabled ("-"). NOTE This parameter is disabled when the Dest (Destination) described below is set to a parameter unrelated to the Voice Elements. Source Determines which controller is to be assigned to and used for the selected Controller Set. This controller then is used to control the parameter set in Destination below. Settings: PB (Pitch Bend wheel), MW (Modulation wheel), AT (Aftertouch), FC1/FC2 (Foot controller 1/2), FS (Foot Switch), RB (Ribbon Controller), BC (Breath controller), AS1 (ASSIGN 1), AS2 (ASSIGN 2), FC2 (Foot Controller 2), AF1 (ASSIGNABLE FUNCTION [1]), AF2 (ASSIGNABLE FUNCTION [2]) NOTE When the foot switch is set to a Control Change number of 96 or higher in the CTL ASN display of the Utility mode, the foot switch will not be available as a "Source" of the Controller Set for the selected Voice. Dest (Destination) Determines the function that is controlled by the controller set in "Source." Settings: See the "Control List" in the "Data List" PDF document. Depth Determines the degree to which the Source controller affects the Destination. Settings: -64 - +0 - +63 Voice Mode Voice Play [F1] PLAY [F3] PORTA [F4] EG [F5] ARP ED [F6] EFFECT Arpeggio Edit [F2] TYPE [F3] MAIN [F4] LIMIT [F5] PLAY FX Normal Voice Edit Common Edit [F1] GENERAL [F2] OUTPUT [F3] EQ [F4] CTL SET [F5] LFO [F6] EFFECT Element Edit [F1] OSC [F2] PITCH [F3] FILTER [F4] AMP [F5] LFO [F6] EQ Drum Voice Edit Common Edit [F1] GENERAL [F2] OUTPUT [F3] EQ [F4] CTL SET [F6] EFFECT Key Edit [F1] OSC [F2] PITCH [F3] FILTER [F4] AMP [F6] EQ Voice Job [F1] INIT [F2] RECALL [F3] COPY [F4] BULK Supplementary Information MOXF6/MOXF8 Reference Manual 32