Yamaha MOXF8 Reference Manual - Page 61
Performance Mode, F3] MEQ Master EQ, F4] USB I/O, SHAPE, FREQ Frequency, Q Frequency Characteristic
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE [F3] MEQ (Master EQ) From this display you can apply five-band equalization (LOW, LOW MID, MID, HIGH MID, HIGH) to all Parts of the selected Performance, or to all Voices. Gain + Q (frequency bandwidth) 0 Frequency - 5 bands LOW LOW MID MID HIGH MID HIGH SHAPE Determines whether the equalizer type used is Shelving or Peaking. The Peaking type attenuates/boosts the signal at the specified Frequency setting, whereas the Shelving type attenuates/boosts the signal at frequencies above or below the specified Frequency setting. This parameter is available only for the LOW and HIGH frequency bands. Settings: shelv (Shelving type), peak (Peaking type) shelv EQ LOW + Gain Frequency EQ HIGH Gain + Frequency 0 0 peak - - Frequency Frequency + Gain Frequency 0 Frequency - FREQ (Frequency) Determines the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting. Settings: LOW: Shelving 32Hz - 2.0kHz, Peaking 63Hz - 2.0kHz LOW MID, MID, HIGH MID: 100Hz - 10.0kHz HIGH: 500Hz - 16.0kHz GAIN Determines the level gain for the Frequency (above), or the amount the selected frequency band is attenuated or boosted. Settings: -12dB - +0dB - +12dB Q (Frequency Characteristic) This varies the signal level at the Frequency setting to create various frequency curve characteristics. Settings: 0.1 - 12.0 NOTE For details on EQ structure, see the "Synthesizer Parameter Manual" PDF document. Performance Mode Performance Play [F1] PLAY [F2] VOICE [F3] PORTA [F4] EG [F5] ARP ED [F6] EFFECT Arpeggio Edit [F1] COMMON [F2] TYPE [F3] MAIN [F4] LIMIT [F5] PLAY FX [F6] OUT CH Performance Edit Common Edit [F1] GENERAL [F2] OUT/MFX [F3] MEQ [F4] USB I/O [F5] A/D IN [F6] EFFECT Part Edit [F1] VOICE [F2] OUTPUT [F3] EQ [F4] TONE [F5] RCV SW Performance Job [F1] INIT [F2] RECALL [F3] COPY [F4] BULK Performance Record [F1] SETUP [F2] REC TR [F3] OTHER [F5] CLICK [F6] INFO Supplementary Information [F4] USB I/O USB OUTPUT SELECT Determines whether the audio signal for each Part is output to USB 1/2 or USB 3/4. This parameter is available only when "Mode" is set to "2StereoRec" in the USB I/O display of the Utility mode. Settings: 1&2, 3&4 MOXF6/MOXF8 Reference Manual 61