Yamaha MOXF8 Reference Manual - Page 41
Voice Mode, F3] FILTER, SF4] KEY FLW Key Follow, SF1] TYPE
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE [SF4] KEY FLW (Key Follow) From this display you can set the Key Follow effect-in other words, how the pitch of the Element and its Pitch EG respond to the particular notes (or octave range) you play. PitchSens (Pitch Key Follow Sensitivity) Determines the sensitivity of the Key Follow effect (the pitch interval of adjacent notes). The Center Key (next parameter) is used as the basic pitch for this parameter. Settings: -200% - +0% - +200% CenterKey (Pitch Key Follow Sensitivity Center Key) Determines the central note or pitch for the Key Follow effect on pitch. Settings: C -2 - G8 NOTE You can also set the note directly from the keyboard, by holding down the [SF6] KBD button and pressing the desired key. EGTimeSens (EG Time Key Follow Sensitivity) Determines the degree to which the notes (specifically, their position or octave range) affect the Pitch EG times of the selected Element. The Center Key (next parameter) is used as the basic pitch for this parameter. Settings: -64 - +0 - +63 CenterKey (EG Time Key Follow Sensitivity Center Key) Determines the central note or pitch for the Key Follow effect on Pitch EG. Settings: C -2 - G8 NOTE You can also set the note directly from the keyboard, by holding down the [SF6] KBD button and pressing the desired key. [F3] FILTER [SF1] TYPE These allow you to make comprehensive settings for the Filter unit. The available parameters differ depending on which Filter type is selected here. Type Determines the Filter Type for the current Element. Basically, there are four different filters: LPF (Low Pass Filter), HPF (High Pass Filter), BPF (Band Pass Filter) and BEF (Band Elimination Filter). For details on settings, see the "Synthesizer Parameter Manual" PDF document. Settings: LPF24D, LPF24A, LPF18, LPF18s, LPF12+HPF12, LPF6+HPF12, HPF24D, HPF12, BPF12D, BPFw, BPF6, BEF12, BEF6, DualLPF, DualHPF, DualBPF, DualBEF, LPF12+BPF6, thru Gain Sets the Gain (the amount of boost applied to the signal sent to the Filter Unit). Settings: 0 - 255 Cutoff (Cutoff Frequency) Determines the cutoff frequency for the Filter. This is used as the basic frequency for the selected Filter Type. Settings: 0 - 255 Resonance/Width This parameter's function varies according to the selected Filter Type. If the selected filter is an LPF, HPF, BPF (excluding BPFw), or BEF, this parameter is used to set the Resonance. For the BPFw, it is used to adjust the frequency bandwidth. This parameter is used to set the amount of Resonance (harmonic emphasis) applied to the signal at the cutoff frequency. This can be used in combination with the "Cutoff" parameter to add further character to the sound. For the BPFw, this parameter is used to adjust the width of the band of signal frequencies passed by the filter. Settings: 0 - 127 Distance Determines the distance between the Cutoff Frequencies for the Dual Filter types (two filters connected in parallel fashion) and the LPF12+BPF6 filter. Settings: -128 - +0 - +127 Voice Mode Voice Play [F1] PLAY [F3] PORTA [F4] EG [F5] ARP ED [F6] EFFECT Arpeggio Edit [F2] TYPE [F3] MAIN [F4] LIMIT [F5] PLAY FX Normal Voice Edit Common Edit [F1] GENERAL [F2] OUTPUT [F3] EQ [F4] CTL SET [F5] LFO [F6] EFFECT Element Edit [F1] OSC [F2] PITCH [F3] FILTER [F4] AMP [F5] LFO [F6] EQ Drum Voice Edit Common Edit [F1] GENERAL [F2] OUTPUT [F3] EQ [F4] CTL SET [F6] EFFECT Key Edit [F1] OSC [F2] PITCH [F3] FILTER [F4] AMP [F6] EQ Voice Job [F1] INIT [F2] RECALL [F3] COPY [F4] BULK Supplementary Information MOXF6/MOXF8 Reference Manual 41