Yamaha MOXF8 Reference Manual - Page 146
Utility Mode, F5] USB I/O, AF1 Assign Function 1 Control Number, FS Foot Switch Control Number
View all Yamaha MOXF8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE AF1 (Assign Function 1 Control Number) AF2 (Assign Function 2 Control Number) Determines the Control Change number generated when you use the ASSIGNABLE FUNCTION [1]/[2] buttons. Keep in mind that if the same MIDI Control Change messages as set here are received from an external device, the internal tone generator also responds to those messages as if the ASSIGNABLE FUNCTION [1]/[2] buttons of the instrument itself was used. Settings: off, 1 - 95 [SF2] FT SW (Foot Switch) From this display you can determine the Control Change number generated by using the Footswitch connected to the FOOT SWITCH jack. Utility Mode [F1] GENERAL [F2] VOICE [F2] SEQ [F3] VCE A/D [F4] CTL ASN [F5] USB I/O [F6] MIDI Utility Job FS (Foot Switch Control Number) From this display you can determine the Control Change number generated by using the Footswitch connected to the FOOT SWITCH [ASSIGNABLE] jack. Keep in mind that if the same MIDI Control Change messages as set here are received from an external device, the internal tone generator also responds to those messages as if the Footswitch of the instrument itself was used. Settings: off, 1 - 95, arp sw, play/stop, PC inc, PC dec, octave reset SustainPedal (Foot Switch Sustain Pedal Select) Determines which model of an optional Foot Switch connected to the FOOT SWITCH [SUSTAIN] jack is recognized. When the FC3 is used: When you connect an optional FC3 (equipped with the half-damper feature) for producing the special "halfdamper" effect (as on a real acoustic piano), set this parameter to "FC3 (Half on)." If you don't need the halfdamper feature or want to disable it while still using an FC3, set this parameter to "FC3 (Half off)." When the FC4 or FC5 is used: Select "FC4/5." The FC4 and FC5 are not equipped with the half-damper feature. Settings: FC3 (Half on), FC3 (Half off), FC4/5 NOTE Note that this setting is not necessary when controlling the half-damper feature via Control Change messages from an external MIDI device to the instrument. [F5] USB I/O Mode Determines the audio input/output connections. The following three settings are available. Settings: VST, 2StereoRec, 1StereoRec VST The audio signal from A/D INPUT [L]/[R] jacks is output to the "USB 1/2" channels of the USB TO [HOST] jack. Also, the audio signal from the tone generator is output to the "USB 3/4" channels of the USB TO [HOST] jack. This mode is for using the 2 stereo channels (4 channels) as the output channels. When using the MOXF6/ MOXF8 Editor VST, set this parameter to "VST." 2StereoRec........ The audio signal from A/D INPUT [L]/[R] jacks is output to the "USB 1/2" channels of the USB TO [HOST] jack. Also, the audio signal from the tone generator is output to the "USB 1/2" channels or the "USB 3/4" channels of the USB TO [HOST] jack. The output channels for the audio signal from the A/D INPUT [L]/[R] is fixed, but the output channels for audio signal from the tone generator can be selected for each part. The output channel for each part is selected in "USB OUTPUT SELECT" of Performance Common Edit (page 61) or Mixing Common Edit (page 116). NOTE In the Voice mode, the output channel for audio signal from the tone generator is fixed to "USB 3/4." MOXF6/MOXF8 Reference Manual 146