Yamaha P-250 Owner's Manual - Page 16

Basic Operation Setting Up ■ Installing the Accessories Music rest To attach the music rest, insert its pins into the holes on the P-250's rear panel, as shown in the diagram below. 3 Plug the other end of the power cable into an AC outlet. ■ Powering Up 1 Turn the power ON by pressing the [POWER] switch. Pedal Connect the included pedal (FC3) to the [1(SUSTAIN)], [2(SOSTENUTO)], or [3(SOFT)] jack on the rear panel. In most situations, you will likely connect the pedal to the [1(SUSTAIN)] jack for use as a sustain pedal (page 23). ■ Before Powering Up 1 Make sure the [POWER] switch is OFF. 2 Plug the appropriate end of the included power cable into the [AC INLET]. AC INLET POWER ON OFF 2 Rotate the [CONTRAST] knob to adjust the brightness of the LCD. 3 Adjust the [MASTER VOLUME] control to a com- fortable listening level while playing the keyboard or playing back the demonstration songs. LCD and LCD control buttons You can use the LCD control buttons (A, B, C, and D) to select and set the items displayed on the LCD. Verify the operation by checking the LCD. When you press the [EXIT] button, the unit displays the initial power-on screen. LCD control buttons LCD control buttons [MASTER VOLUME] SONG KEYBOARD MIN MAX MASTER VOLUME SONG BALANCE TRACK1 TRACK2 EX.TRACKS SONG FILE MIDI OUT PANEL LOCK A SONG SELECT TOP START/STOP REC SONG SETTING DOWN UP NEW SONG SYNCHRO START SONG C TEMPO LCD [CONTRAST] B NO YES D CONTRAST EXIT G.PIANO 1 G.PIANO 2 E.PIANO1 E.PIANO2 E.PIANO3 CLAVI. HARPSI. VIBES VOICE EDIT SPLIT 1 2 3 4 5 6 7 8 ORGAN 1 ORGAN 2 STRINGS CHOIR SYNTH. PAD GUITAR BASS XG VARIATION 9 10 11 12 13 14 15 16 VOICE/PERFORMANCE A B REVERB CHORUS PERFORMANCE MIDI SETTING MASTER EQ EDIT PERFORM. FILE OTHER SETTING 16 P-250 [EXIT]