Yamaha P-250 Owner's Manual - Page 70
Setting the LSB of the Send Bank Select mes
View all Yamaha P-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Edit Operation Editing a Voice in Detail [VOICE EDIT] • Refer to page 61 for general information on setting the parameters. • Refer to pages 3-5 of the separate "Data List" for information on the default parameter settings. • All parameters accessed via the [VOICE EDIT] button are performance parameters (page 30). ■ Setting the MSB of the Send Bank Select message* [SendBankMSB(SendMSB)] ■ Setting the LSB of the Send Bank Select message* [SendBankLSB(SendLSB)] ■ Setting the Program Change message* [SendPG#] Press the D[-]/[+] buttons to select "PRESET" (preset value) or a fixed value ranging from 0 through 127 (For the "SendPG#" parameter, from 1 through 128). If you select "PRESET," the same value as that is sent to the internal tone generator will be output. If you change one of these three parameter settings from a fixed value to "PRESET," the rest of the parameters will be also changed to "PRESET." On the other hand, if you change one of the settings from "PRESET" to a fixed value, the rest of the parameters will be set to the same fixed value. ■ Turning the Internal tone generator on/off* [InternalTG] Press the D[-]/[+] buttons to turn the Internal Voice on/ off. 70 P-250