Yamaha YAS-706 Owners Manual - Page 13

Connecting playback devices Connect video devices such as BD/DVD players, cable or satellite set-top boxes (STBs), and game consoles to the unit. Depending on the video/audio output jacks available on your video device, choose one of the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack. HDMI connection Connect a video device to the unit with an HDMI cable (not supplied). NOTE • This unit supports HDCP version 2.2, a copy protection technology. Center unit (rear) Video device Coaxial connection Connect a video device to this unit via a coaxial digital cable. Next, connect the video device's video output to the TV's video input. Center unit (rear) Video device To video output jack C COAXIAL COAXIAL input jack COAXIAL C Audio output (coaxial digital) HDMI IN 1 IN 2 HDMI IN 1 and 2 jacks HDMI HDMI output HDMI HDMI The audio/video played on the video device will be output though the unit by switching the unit's input to HDMI 1 or 2 using the HDMI 1 or 2 key on the remote control. HINT • Once the HDMI control function has been activated (p. 46), video and audio content from playback devices can be output from the TV even when this unit is off (HDMI signal pass-through). • Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m (16 ft) is recommended to prevent degradation of signal quality. • For playback of 3D and 4K video content, use a high-speed HDMI cable. To video input jack TV The audio played on the video device will be output though the unit by switching the unit's input to COAXIAL using the COAXIAL key on the remote control. PREPARATION ➤ Connecting the unit En 13