Yamaha YAS-706 Owners Manual - Page 50

Auto Power Standby Setup Menu ➜ Function ➜ Auto Power Standby Enabling the auto power standby function prevents the unit from remaining on when not in use. Settings Off (default) On Disable the auto power standby function. Enable the auto power standby function. The unit automatically turns off in any of the following situations. − No operations for 8 hours − No audio input and no operations for 20 minutes when HDMI 1-2, BLUETOOTH or NET is selected as the input source. The auto power standby function can also be configured without using the setup menu. Follow the procedure below. 1 Turn off the unit. 2 Hold down the key and press the key on the unit. CONNECT The auto power standby function is enabled or disabled, and the unit turns on. For several seconds immediately after the unit is turned on, the indicator shows auto power standby function status. Off (enabled), glows (disabled) Information Display information for the audio and video signal input to this unit. Audio Setup Menu ➜ Information ➜ Audio The following information on the current audio input signal is displayed. Format Number of channels Sampling frequency Bit rate Digital audio format The number of channels contained within the input signal-front/ surround/low field effects (LFE). Example: "3/2/0.1" means signal contains 3 front channels, 2 surround channels, and LFE. If the signal contains channels other than front, surround, and LFE, the total number of channels may be displayed. Example: "5.1ch" The sampling frequency of the digital input signal The per-second bit rate of the input signal HINT • The audio bit rate may not be displayed for some input signals. Video Setup Menu ➜ Information ➜ Video The following information on the current video input signal is displayed. Type Resolution HDMI or DVI Video signal resolution System Setup Menu ➜ Information ➜ System Display the version of firmware currently installed on this unit. SETTINGS ➤ Setup menu En 50