Yamaha YAS-706 Owners Manual - Page 53

Initializing the unit, Updating firmware with connection of a USB flash, drive

Get Yamaha YAS-706 PDF manuals and user guides View all Yamaha YAS-706 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Updating firmware with connection of a USB flash drive Download the latest firmware version from the Yamaha website to a USB flash drive, which can then be used to update the unit's firmware. See information provided when updating firmware for details. 1 Save this unit's firmware to a USB flash drive. 2 Turn off the unit. 3 Connect the USB flash drive to the UPDATE ONLY jack on the unit's rear panel. 4 Hold down the key and press the key. CONNECT The firmware update begin. Update progress can be confirmed using the indicators on the unit. Initializing the unit Follow the procedure below to initialize the unit. 1 Turn off the unit. 2 Hold down the key and press the indicators flash. key on the unit until all CONNECT Initialized Update progress If the update is completed successfully, all indicators on the unit will flash. 5 Press the key on the unit. CONNECT The firmware update is complete. NOTE • If the firmware update fails, the indicator at far right on the unit will flash blue. Press the key to turn unit off and then on again, and repeat the procedure from step 1 again. If the firmware update fails again, confirm the USB flash drive is correctly connected to the UPDATE ONLY jack. SETTINGS ➤ Initializing the unit En 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
SETTINGS
➤
Initializing the unit
En
53
Updating firmware with connection of a USB flash
drive
Download the latest firmware version from the Yamaha website to a USB flash drive,
which can then be used to update the unit’s firmware.
See information provided when updating firmware for details.
1
Save this unit’s firmware to a USB flash drive.
2
Turn off the unit.
3
Connect the USB flash drive to the UPDATE ONLY jack on the unit’s
rear panel.
4
Hold down the
key and press the
key.
The firmware update begin.
Update progress can be confirmed using the indicators on the unit.
If the update is completed successfully, all indicators on the unit will flash.
5
Press the
key on the unit.
The firmware update is complete.
NOTE
•
If the firmware update fails, the indicator at far right on the unit will flash blue. Press the
key to turn unit
off and then on again, and repeat the procedure from step 1 again. If the firmware update fails again,
confirm the USB flash drive is correctly connected to the UPDATE ONLY jack.
Follow the procedure below to initialize the unit.
1
Turn off the unit.
2
Hold down the
key and press the
key on the unit until all
indicators flash.
CONNECT
Update progress
CONNECT
Initializing the unit
CONNECT
Initialized