Yamaha YAS-706 Owners Manual - Page 30
Using connection methods other than the, MusicCast CONTROLLER app wireless, network
View all Yamaha YAS-706 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
/ ENTER RETURN SETUP Using connection methods other than the MusicCast CONTROLLER app (wireless network) Use the setup menu on the unit to connect to a wireless network without using the MusicCast CONTROLLER app. • Sharing the iOS device setting (p. 30) • Using the WPS push button configuration (p. 31) • Searching for a wireless router (access point) (p. 32) • Setting up the wireless connection manually (p. 34) • Using the WPS PIN code (p. 36) NOTE • Once the unit has been connected to a wireless network using any of the methods described above, network settings will change when connection to a wireless network is established with the MusicCast CONTROLLER app. • AirPlay is the only network function that can be used without the MusicCast CONTROLLER app. Sharing the iOS device setting You can easily setup a wireless connection by applying the connection settings on iOS devices (such as an iPhone). Before proceeding, confirm that your iOS device is connected to a wireless router (access point). NOTE • You need iOS device with iOS 7 or later. • The connection settings on iOS devices cannot be applied to the unit to establish a wireless connection if your wireless router (access point) uses WEP encryption. See "Searching for a wireless router (access point)" (p. 32) to establish a connection. 1 Press the z key to turn on this unit. 2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack; p. 16). 3 Press the SETUP key. The setup menu is displayed on the TV screen. 4 Use the S/T keys to select "Network", and press the ENTER key. 5 Use the S/T keys to select "Network Connection", and press the ENTER key. 6 Use the S/T keys to select "Wireless (Wi-Fi)", and press the ENTER key. 7 Use the S/T keys to select "Share Wi-Fi Settings", and press the ENTER key. 8 When the following screen is displayed, press the ENTER key. HINT • The settings to be deleted (initialized) will be displayed. If you do not want to delete these settings, press the RETURN key to terminate the connection. NETWORKS ➤ Connecting to a network En 30