Yamaha YAS-706 Owners Manual - Page 52
Updating the unit’s firmware, Using Network Update in the setup, menu to update firmware
View all Yamaha YAS-706 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
/ ENTER RETURN SETUP Updating the unit's firmware New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. The unit's firmware can be updated as follows. • Update firmware from "Network Update" in the setup menu. To perform the procedure, your TV must be connected to the unit via HDMI. • Update firmware using the dedicated MusicCast CONTROLLER app installed on a mobile device. Follow MusicCast CONTROLLER guides to operate the app and update the firmware. Cautions • Do not operate the unit or disconnect the power cable or network cable during firmware update. • If the Internet connection speed is slow, or the unit is connected to the wireless network, network update may not be possible depending on the condition of the network connection. Should this occur, try again at a later time. • For details on update, visit the Yamaha website. Using "Network Update" in the setup menu to update firmware When the unit is turned on for the first time after a new version of the unit's firmware has been released, a message indicating that a firmware update is available will be displayed on the TV screen. Network Update New firmware available. You can start the update from the "Setup Menu" . It takes about 20 min. to update firmware. [SETUP] : Setup Menu [RETURN] : Cancel HINT • To update the firmware later, press the RETURN key when the "Network Update" screen is displayed on the TV screen. 1 Press the SETUP key. 2 Use the S/T keys to select "Network", and then press the ENTER key. 3 Use the S/T keys to select "Network Update", and then press the ENTER key. 4 Press the ENTER key. The TV screen goes black and firmware update begins. Update progress can be confirmed using the indicators on the unit. Update progress If the update is completed successfully, all indicators on the unit will flash. 5 Press the key on the unit. CONNECT The firmware update is complete. NOTE • If the firmware update fails, the indicator at far right on the unit will flash blue. Press the key to turn unit off and then on again, and repeat the procedure from step 1 again. If the update fails again, check the network connection. SETTINGS ➤ Updating the unit's firmware En 52