Yamaha YAS-706 Owners Manual - Page 60

Network Problem The network feature does not function. "Not connected" is displayed with "Wireless (Wi-Fi)" configuration; unable to connect to wireless router (access point). "Not connected" is displayed with "Wireless (Wi-Fi)" configuration using the WPS function ("WPS Button" and "PIN Code") and "Access Point Scan"; unable to connect to wireless router (access point). "Not connected" is displayed with "Wireless (Wi-Fi)" configuration using the WPS function ("WPS Button" and "PIN Code"); unable to connect to wireless router (access point). Playback stops unexpectedly and files cannot be played continuously. The unit does not detect the PC. The files in the PC cannot be viewed or played back. Cause Remedy The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on your router and set "DHCP" in the setup menu to "On" on the unit (p. 48). If you want to configure the network parameters manually, check that you are using an IP address which is not used by other network devices in your network. The wireless router's MAC address filter is enabled. A connection cannot be established if the wireless router's MAC address filter is enabled. Check wireless router (access point) settings and try a different connection method (p. 48). The wireless router (access point) does not broadcast its SSID. A connection cannot be established if the wireless router (access point) is configured so that it does not broadcast its SSID. Check wireless router (access point) settings and try a different connection method (p. 31, 36). The wireless router (access point) uses WEP encryption. A connection cannot be established using the WPS function. Try a different connection method (p. 31, 36). The folder contains some files that cannot be played via the unit. The media sharing setting is not correct. Some security software installed on your PC is blocking the access of the unit to your PC. The unit and PC are not in the same network. The MAC address filter is enabled on the unit. The files are not supported by the unit or the media server. Delete or move files (including video or hidden files) that cannot be played via the unit from the folder. Configure the sharing setting and select the unit as a device to which music contents are shared (p. 39). Check the settings of security software installed on your PC. Check the network connections of the unit and PC, and then connect the unit and the PC to the same network. In "MAC Address Filter" in the setup menu, disable the MAC address filter or specify the MAC address of your PC to allow it to access to the unit (p. 48). Use the file format supported by both the unit and the media server (p. 39). APPENDIX ➤ Troubleshooting En 60