Yamaha YAS-706 Owners Manual - Page 15
Turning on the unit
View all Yamaha YAS-706 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Turning on the unit This section explains initial setup of the unit, performed when it is turned on for the first time after purchase. Wired connection z 1 Press the z key to turn on the unit. If there is no sound coming from the subwoofer, or if sound is intermittent, due to the influence of radio waves from other devices, connecting the center unit and subwoofer via cables will When the center unit is turned on, the center unit and solve the problem. Connect the center unit and subwoofer via an subwoofer are automatically connected via wireless RCA mono cable (not supplied) and a 3.5 mm monaural mini connection. Once the connection has been successfully plug cable (not supplied). A 3.5 mm monaural mini plug cable is established, the STATUS indicator on the subwoofer glows as required to turn the center unit and subwoofer on and off at the shown in the illustration below, and the unit is ready for play same time. back. RCA mono cable STATUS STATUS indicator Glows green NOTE • If the STATUS indicator does not glow properly the first time the unit is turned on, pair the center unit and subwoofer manually. See "Pairing the center unit and subwoofer" (p. 62). 3.5 mm monaural mini plug cable SUBWOOFER SYSTEM OUT CONNECTOR SYSTEM INPUT CONNECTOR SUBWOOFER PAIRING STATUS SYSTEM INPUT CONNECTOR To connect the center unit and subwoofer using a wired connection, set "Bass Out" of "Subwoofer" in the setup menu to "Wired" (p. 45). When the center unit is turned on, the subwoofer turns on and its STATUS indicator glows green. NOTE • Be sure the center unit is turned off before connecting the subwoofer. • The subwoofer supplied with the unit can only be connected. PREPARATION ➤ Turning on the unit En 15