ZyXEL G-320H User Guide - Page 25
Tutorial
View all ZyXEL G-320H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
CHAPTER 2 Tutorial The following sections show you how to join a wireless network using the ZyXEL utility, as in the following diagrams. The wireless client is labeled C and the access point is labeled AP. Figure 7 Infrastructure Network There are three ways to connect the wireless client (the G-320H in station mode) to a network. • Configure nothing and leave the wireless client to automatically scan for and connect to any available network that has no wireless security configured. • Manually connect to a network (see Section 2.1 on page 25). • Configure a profile to have the wireless client automatically connect to a specific network or peer computer (see Section 2.2 on page 27). This chapter also includes a simple example of how to configure the G-320H as an AP using the ZyXEL utility. See Section 2.3 on page 30 for more information. 2.1 Connecting to a Wireless LAN This example illustrates how to manually connect your wireless client to an access point (AP) which is configured for WPA-PSK security and connected to the Internet. Before you connect to the access point, you must know its Service Set IDentity (SSID) and WPA-PSK pre-shared key. In this example, the SSID is "SSID_Example3" and the pre-shared key is "ThisismyWPA-PSKpre-sharedkey" in the AP. After you install the ZyXEL utility and then insert the wireless client, follow the steps below to connect to a network using the Site Survey screen. 1 Open the ZyXEL utility and click the Site Survey tab to open the screen as shown next. G-320H User's Guide 25