ZyXEL G-320H User Guide - Page 48
obtain the certificates from a certificate authority CA., Consult your network administrator for more
View all ZyXEL G-320H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 4 Wireless Station Mode Configuration Table 8 Station Mode: Security Setting: WPA/WPA2 LABEL DESCRIPTION Certificate This field is only available when you select TLS in the Authentication Type field. Select a certificate used by the authentication server to authenticate the G-320H. Validate Server Certificate PEAP Inner EAP Back Next Exit Note: You must first have a wired connection to a network and obtain the certificate(s) from a certificate authority (CA). Consult your network administrator for more information. Select the check box to check the certificate of the authentication server. This field is only available when you select PEAP in the Authentication Type field. The PEAP method used by the RADIUS server or AP for client authentication is MS CHAP v2. Click Back to go to the Site Survey screen to select and connect to another network. Click Next to confirm your selections and advance to the Confirm New Settings screen. Refer to Section 4.3.2 on page 49. Click Exit to return to the Site Survey screen without saving. 4.3.1.4 IEEE 802.1x Configure IEEE 802.1x security with various authentication methods in this screen. Figure 28 Station Mode: Security Setting: IEEE 802.1x The following table describes the labels in this screen. Table 9 Station Mode: Security Setting: IEEE 802.1x LABEL DESCRIPTION Authentication Type The type of authentication you use depends on the RADIUS server or AP. Select an authentication method from the drop down list. Options are TLS and PEAP. Login Name Enter a user name. This is the user name that you or an administrator set up on a RADIUS server. Password This field is not available when you select TLS in the Authentication Type field. Enter the password associated with the user name above. 48 G-320H User's Guide