ZyXEL G-320H User Guide - Page 37
Enabling OTIST, OTIST, Setup, Wireless LAN
View all ZyXEL G-320H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 3 Wireless LAN Network 3.3.1 Enabling OTIST " You must enable OTIST on both the AP and wireless client before you start transferring settings. We use the P-334U in this guide as the example AP. Screens may vary slightly for your ZyXEL devices. The AP and wireless client(s) MUST use the same Setup key. 3.3.1.1 AP On the P-334U, you can enable OTIST using the OTIST button or the web configurator. If you use the OTIST button, the default (01234567) or previous saved (through the web configurator) Setup key is used to encrypt the settings that you want to transfer. Hold in the OTIST button for about two seconds. In the web configurator, go to the Wireless LAN main screen and then select OTIST. To change the Setup key, enter zero to eight printable characters. To have OTIST automatically generate a WPA-PSK key, select the Yes check box. If you manually configured a WEP key or a WPA-PSK key and you also selected this check box, then the key you manually configured is used. G-320H User's Guide 37