ZyXEL G-320H User Guide - Page 30
Configuring the G-320H as an AP, Link Info, Profile, AP Mode, Status, Association List
View all ZyXEL G-320H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 2 Tutorial Figure 17 ZyXEL Utility: Profile Activate 8 When you activate the new profile, the ZyXEL utility goes to the Link Info screen while it connects to the AP using your settings. When the wireless link is established, the ZyXEL utility icon in the system tray turns green and the Link Info screen displays details of the active connection. 9 Make sure the selected AP in the active profile is connected to the Internet. Open your Internet browser, enter http://www.zyxel.com or the URL of any other web site in the address bar and press ENTER. If you are able to access the web site, your new profile is successfully configured. 10 If you cannot access the Internet, go back to the Profile screen. Select the profile you are using and click Edit. Check the details you entered previously. Also, refer to the Troubleshooting section of this User's Guide or contact your network administrator if necessary. 2.3 Configuring the G-320H as an AP " In access point mode, your G-320H allows you to set up your wireless network without using a dedicated AP. Refer to Section 1.2.3 on page 21 and Chapter 5 on page 59 for more information. With WZC, you cannot use the G-320H as an access point. After you install the ZyXEL utility and then insert the G-320H, follow the steps below to set up your G-320H as an AP. 1 Select AP Mode in any utility screen and wait for five seconds. The screen changes and displays as next. Under Status, you can view the current settings on the G-320H. In the Association List, you can see if any wireless clients have connected to your G-320H. 30 G-320H User's Guide