ZyXEL G-320H User Guide - Page 49
Confirm New Settings, Note: You must first have a wired connection to a network
View all ZyXEL G-320H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 4 Wireless Station Mode Configuration Table 9 Station Mode: Security Setting: IEEE 802.1x LABEL DESCRIPTION Certificate This field is only available when you select TLS in the Authentication Type field. Select a certificate used by the authentication server to authenticate the G-320H. Validate Server Certificate PEAP Inner EAP Back Next Exit Note: You must first have a wired connection to a network and obtain the certificate(s) from a certificate authority (CA). Consult your network administrator for more information. Select the check box to check the certificate of the authentication server. This field is only available when you select PEAP in the Authentication Type field. The PEAP method used by the RADIUS server or AP for client authentication is MS CHAP v2. Click Back to go to the Site Survey screen to select and connect to another network. Click Next to confirm your selections and advance to the Confirm New Settings screen. Refer to Section 4.3.2 on page 49. Click Exit to return to the Site Survey screen without saving. 4.3.2 Confirm New Settings Use this screen to confirm and save the security settings. Figure 29 Station Mode: Confirm New Settings The following table describes the labels in this screen. Table 10 Station Mode: Confirm New Settings LABEL DESCRIPTION Network(SSID) This field displays the SSID previously entered. Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the wireless device. Security This field shows whether data encryption is active (WEP, WPA-PSK, WPA, 802.1x, WPA2, WPA2-PSK) or inactive (Disabled). Channel This field displays the channel number used by the profile. Back Click Back to return to the previous screen. G-320H User's Guide 49