ZyXEL MGS-3712F User Guide - Page 91

Chapter 8 Basic Setting 8.7 Port Setup Use this screen to configure Switch port settings.Click Basic Setting > Port Setup in the navigation panel to display the configuration screen. Figure 46 Basic Setting > Port Setup The following table describes the labels in this screen. Table 12 Basic Setting > Port Setup LABEL DESCRIPTION Port This is the port index number. * Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Active Name Note: Changes in this row are copied to all the ports as soon as you make them. Select this check box to enable a port. The factory default for all ports is enabled. A port must be enabled for data transmission to occur. Enter a descriptive name that identifies this port. You can enter up to 64 alpha-numerical characters. Type Note: Due to space limitation, the port name may be truncated in some web configurator screens. This field displays 10/100/1000M for Gigabit connections. MGS-3712/MGS-3712F User's Guide 91