2010 Acura RDX Owner's Manual - Page 153

Driving Position Memory System To cancel the storing procedure after pressing the SET button, do any of the following: ● Selecting a Memorized Position To select a memorized position, do this: 1. Make sure the vehicle is parked. 2. Press the desired memory button (1 or 2) until you hear a beep, then release the button. The system will move the seat and outside mirrors to the memorized positions. The indicator in the selected memory button will flash during movement. When the adjustments are complete, you will hear two beeps, and the indicator will remain on. To stop the system's automatic adjustment, do any of these actions: ● Fail to press a memory button within 5 seconds. Readjust the seat position. Readjust the outside mirror position. Press any button on the control panel: SET, 1, or 2. Push any of the adjustment switches for the seat. Shift out of Park. Adjust the outside mirrors. Instruments and Controls ● ● ● ● ● Each memory button stores only one driving position. Storing a new position erases the previous setting stored in that button's memory. If you want to add a new position while retaining the current one, use the other memory button. If desired, you can use the adjustment switches to change the positions of the seat or outside mirrors after they are in their memorized positions. If you change the memorized position, the indicator in the memory button will go out. To keep this driving position for later use, you must store it in the driving position memory. 149 2010 RDX