2010 Acura RDX Owner's Manual - Page 51

Installing a Child Seat Driver and Passenger Safety Rigid type Flexible type TETHER STRAP 3. Place the child seat on the vehicle seat, then attach the seat to the lower anchors according to the child seat maker's instructions. Some LATCH-compatible seats have a rigid-type connector as shown above. Other LATCH-compatible seats have a flexible-type connector as shown above. 4. Whatever type you have, follow the child seat maker's instructions for adjusting or tightening the fit. 5. Remove the cargo area cover, and place it on the cargo area floor (see page 160). 6. Lift the head restraint (see page 135), then route the tether strap through the legs of the head restraint and over the seat-back, making sure the strap is not twisted. CONTINUED 47 2010 RDX