2010 Acura RDX Owner's Manual - Page 301

Compass 2. Select ''CAL'' by pressing preset 1 to enter the calibration mode. If you want to cancel this mode, select ''R'' by pressing preset 3. The display will return to the normal display. 3. Select ''CAL START'' by pressing preset 1. The system will start the calibration. ''CAL'' will appear on the display, then the direction will also begin to blink. If you select ''R'' by pressing preset 3, the display will return to the compass setting mode. Compass Zone Selection In most areas, there is a variation between magnetic north and true north. Zone selection is required so the compass can compensate for this variation. To check and select the zone set into the compass, do the procedure on the following pages. Features 4. When the direction stops blinking, the calibration mode is completed. The display will return to the normal display. CONTINUED 297 2010 RDX