2010 Acura RDX Owner's Manual - Page 439
2010 Acura RDX Manual
Page 439 highlights
Lights 6. Turn on the lights to make sure the new bulb is working. 7. Put the socket back into the light assembly, and turn it clockwise to lock it in place. 8. Install the rear light assembly in the rear pillar. Tighten the two bolts. Snap the bolt covers into position. Replacing a Front Fog Light Bulb Your vehicle uses halogen light bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. SCREWS Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. HOLDING CLIP 1. Use a Phillips-head screwdriver to remove the screw and use a flat-tip screwdriver to remove the holding clip located under the front bumper. 2. Push up the undercover. Maintenance CONTINUED 435 2010 RDX