2010 Acura RDX Owner's Manual - Page 435
2010 Acura RDX Manual
Page 435 highlights
Lights Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the cargo area or pull a trailer, readjustment may be required. Adjustments should be done by your dealer or another qualified technician. Low Beam Headlight Bulb Replacement The low beam headlight bulbs are high voltage discharge tube. High voltage can remain in the circuit even with the light switch off and the key removed. Because of this, you should not attempt to examine or change a low beam headlight bulb yourself. If a low beam headlight bulb fails, take the vehicle to your dealer to have it replaced. Replacing a High Beam Headlight Bulb Your vehicle has halogen headlight bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. BULB CONNECTOR Halogen headlight bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. 1. Open the hood. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 2. Remove the bulb by turning it about one-quarter turn counterclockwise. 3. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. 4. Push the electrical connector onto the new bulb. 5. Turn on the headlights to test the new bulb. Maintenance CONTINUED 431 2010 RDX