2010 Acura RDX Owner's Manual - Page 86

Multi-Information Display Customized Settings With the multi-information display and the INFO ( / ) and SEL/ RESET buttons on the right side of the steering wheel, you can customize some vehicle control settings. To enter the customizing mode, press and hold the INFO ( / ) button for more than 3 seconds. To change the settings, the ignition switch must be in the ON (II) position, and the vehicle must be stopped with the transmission in Park. You cannot customize the settings under these conditions: ● If you turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position. If you move the shift lever out of Park. DEFAULT ALL CHG SETTING If you want the settings as they were when the vehicle left the factory, select DEFAULT ALL, as described on page 85. If you want to change any vehicle control settings, select CHG SETTING, then press the SEL/ RESET button (see page 86). Refer to the table on the following pages about the settings you want to customize. ● The first customizing menu is: ● ● 82 2010 RDX