2008 BMW 1 Series Owner's Manual - Page 219

Removing the headlamp cover 1. Pull the wire brackets over the notches, see arrow, and fold to the side. 4. Reattach the bulb holder with the notch at the top. 5. Fold the holding bracket back up and let it snap into place. 6. Attach the headlamp cover. Parking lamps, roadside parking lamps 5 watt bulb, W5W 1. Remove the headlamp cover. Controls Reference Mobility Communications Entertainment Navigation Driving tips The figure shows the right-hand headlamp. 2. Pull out the bulb holder. 3. Remove and replace the bulb. 4. Reinsert the bulb holder. 5. Attach the headlamp cover. 2. Fold away the headlamp cover. Be careful when attaching the headlamp cover and ensure that both wire brackets are securely in place, otherwise leaks could occur and cause damage to the headlamp system.< Attach the headlamp cover in reverse order. Halogen headlamps Halogen low beams and high beams H7 bulb, 55 watts Always wear gloves and eye protection; the atmosphere within the H7 bulb is pressurized. Otherwise there is a risk of injury if the bulb is damaged.< Xenon headlamps Parking lamps, roadside parking lamps, daytime running lamps H8 bulb, 35 watts The figure shows the right-hand headlamp. 1 2 High beams Low-beam headlamps The figure shows the right-hand headlamp. 1. Remove the headlamp cover. 2. Turn the bulb, see arrow, and remove it. 3. Pull off the connector and replace the bulb. 1. Remove the headlamp cover. 2. Fold down the holding bracket. 3. Remove and replace the bulb. 217 Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG At a glance