2008 BMW 1 Series Owner's Manual - Page 220
2008 BMW 1 Series Manual
Page 220 highlights
Replacing components 4. Attach the connector, insert the bulb and turn it all the way in the opposite direction. 5. Attach the headlamp cover. Corner-illuminating lamps H3 bulb, 55 watts The figure shows the right-hand headlamp. 1. Remove the top headlamp cover, using the screwdriver to push the detents to one side. 1. Turn the respective wheel inwards. 2. Using a coin, turn both locks of the cover all the way to the left, arrow 1, and remove the cover. 3. Turn the bulb holder to the left and remove it, arrow 2. 4. Apply gentle pressure to the bulb while turning it to the right for removal and replacement. 2. Turn the bulb holder, see arrow, and remove it. 5. Insert the bulb holder and lock it by turning it to the right. 6. Attach the cover by positioning the bottom edge first and then turning both locks all the way to the right. Tail lamps > Turn signal: 21 watt bulb, PY21W > Backup lamp: 16 watt bulb, W16W 3. Slide the bulb out of the holder and pull off the connector. 4. Replace the bulb and attach the connector. 5. Insert the bulb holder and turn it all the way in the opposite direction. 6. Attach the headlamp cover. > Brake lamps: 21 watt bulb, P21W > Brake Force Display lamp: 21 watt bulb, H21W Turn signals, front 21 watt bulb, PY21W Silver Vision The turn signal bulb can be changed via a cover in the wheel arch. 1 2 218 Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG Inner brake lamp Outer brake lamp