2008 BMW 1 Series Owner's Manual - Page 46
2008 BMW 1 Series Manual
Page 46 highlights
Opening and closing Wind deflector The wind deflector keeps air currents in the passenger compartment at a low level when the convertible top is down and provides for an even more pleasant journey at higher speeds. 5. Position the free locking pins at the corresponding openings and let the spring tension lock the wind deflector in place. Installation 1. Remove the wind deflector from the protective cover and unfold it, arrows 1. 6. Fold up the top section of the wind deflector. With the wind deflector installed: do not recline the front-seat backrests too far if the seat is to be slid all the way back, as this would damage the wind deflector.< 2. Press together the top and bottom parts of the wind deflector until the catch engages, arrow 2. 3. Position both locking pins of one side at the openings provided for them. Removing the wind deflector Proceed in the reverse order as used for installation. Folding 4. Press the wind deflector into the openings, arrows 3, overcoming the tension in the springs, and push the free locking pin in the same direction, arrow 4. Slide the red release lever towards the middle of the wind deflector and push the two halves apart. 44 Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG