2008 BMW 1 Series Owner's Manual - Page 80
2008 BMW 1 Series Manual
Page 80 highlights
Everything under control 6. Select a text message and press the controller. Applying your current speed as limit Select "Select current speed" and press the controller. The system adopts your current speed as the limit. Activating the limit Select "On" and press the controller. Limit is activated. Stopwatch To exit the display: Select and press the controller. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Call up "Navigation". 3. Select "Car Data" and press the controller. 4. Select "Stopwatch" and press the controller. > Starting, stopping or resetting the stopwatch > Taking an interim time reading Speed limit* You can enter a speed, and a Check Control message will indicate when you reach this speed. This enables you, for example, to receive warnings if you exceed a speed limit in an urban area. You are only warned of reaching this speed a second time if your vehicle speed falls below it again by at least 3 mph/5 km/h. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Call up "Navigation". 3. Select "Car Data" and press the controller. 4. Select "Limit" and press the controller. Starting, stopping or resetting > Select "Start" and press the controller. The stopwatch starts at the displayed time. > Select "Reset" and press the controller. The stopwatch is reset and restarts if it was running beforehand. > Select "Stop" and press the controller. This stops the timer. Setting or changing the limit 1. Select the speed and press the controller. 2. Turn the controller to set the limit. 3. Press the controller to apply the setting. Taking an interim time reading Select "Interim time" and press the controller. The interim time appears below the ongoing primary stopwatch count. 78 Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG