2008 BMW 1 Series Owner's Manual - Page 221
2008 BMW 1 Series Manual
Page 221 highlights
3 4 5 6 7 8 Lateral reflector Roadside parking lamp and tail lamp LED Reflector Turn signal Backup lamp Brake Force Display lamp Inner brake lamp, turn signal, backup lamp and Brake Force Display lamp Replacing tail lamps Outer brake lamp The bulbs are integrated in a single bulb holder. 1. Remove the cover from the panel of the cargo bay. 2. Detach the bulb holder by pressing together the clips, see arrow, and remove it. 3. Brake lamps and turn signal: apply gentle pressure to the bulb while turning it to the left for removal and replacement. The outer brake lamp can be accessed through a single socket. The figure shows the right side of the vehicle. 1. Remove the cover from the panel of the cargo bay. 2. Turn the bulb holder to the left, see arrow, and remove it. 3. Apply gentle pressure to the bulb while turning it to the left for removal and replacement. 4. Attach the bulb holder and turn it all the way in the opposite direction. 5. Reattach the cover. 4. Backup lamp: pull the bulb out of the socket and replace it. 5. Attach the bulb holder and let it snap into place. 6. Reattach the cover. The roadside parking lamp/tail lamp uses LED design. After replacing the bulb, ensure that the bulb holder is properly seated, otherwise the roadside parking lamp/tail lamp may not work.< License plate lamps and center brake lamp These lamps use LED technology for operation. In the event of a malfunction, please contact your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Changing wheels Your BMW is equipped with Run-Flat Tires as standard. This removes the need to change a wheel immediately in the event of a puncture. 219 Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG Reference Mobility Communications Entertainment Navigation Driving tips Controls At a glance