2008 BMW 1 Series Owner's Manual - Page 79

Hiding Check Control messages 3. Push button 1 to check for other messages. 4. Press button 2. The display again shows the outside temperature and the time. Viewing more information later iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. Press the button in the turn indicator lever. Some Check Control messages are displayed until the respective malfunction has been rectified. They cannot be hidden. If several malfunctions occur at the same time, they are displayed in succession. They are marked with the symbol shown here. Other Check Control messages are automatically hidden after approx. 20 seconds, but are kept in memory. They are marked with the symbol shown here. 4. Select "Service Info" and press the controller. 5. If necessary, move the highlight marker to the uppermost field. Turn the controller until "Check Control messages" is selected and press the controller. 2. Press the controller to open the menu. 3. Select "Info sources" and press the controller. Controls Reference Mobility 77 Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG Viewing stored Check Control messages 1. Push button 1 in the turn indicator lever up or down repeatedly until the appropriate symbol appears in the display, accompanied by the words "CHECK". 2. Press button 2. "CHECK OK" appears if there are no Check Control messages. If a Check Control message has been stored, the corresponding lamp comes on. It is accompanied by a text message on the Control Display. Communications Entertainment Navigation Driving tips At a glance