2008 BMW M6 Owner's Manual - Page 105

In the highest setting you activate the maximum heating output, regardless of the outside temperature. Defrosting windows and removing condensation Quickly remove ice and condensation from the windshield and front side windows. To do this, also switch on the cooling function. Adapting temperature in upper body region 1. Press the button to display the current setting on the Control Display. 2. Select the field by moving the controller and adjust the temperature by turning the controller. Air volume, manual You can adjust the air volume by turning. You can reactivate the automatic mode for the air volume with the AUTO button. The air quantity is reduced and if need be, the ventilation is switched off in order to reduce the load on the battery. The display stays the same. You can also adjust the temperature in the upper body region with iDrive. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Open "Climate". 3. Select "Vent settings" and press the controller. 4. Select the field by moving the controller and adjust the temperature by turning the controller. Air distribution, manual You can route the air flowing out into the vehicle interior via various programs, separately for the driver's and passenger's side: > Upper body region > Upper body region and footwell > Footwell > Driver's side: windows and footwell > Individual program Selecting program Mobility Reference Press the button repeatedly until the desired air distribution of the respective program is shown on the Control Display. 103 Online Edition for Part no. 01 41 0 014 244 - © 08/07 BMW AG Communications Entertainment Navigation Driving tips The rear window defroster switches off automatically after a certain amount of time. Convertible: the rear window defroster is only activated when the rear window is closed. Depending on the vehicle equipment, upper wires are used as an antenna and are not part of the rear window defroster. Controls Rear window defroster At a glance