2008 BMW M6 Owner's Manual - Page 106
2008 BMW M6 Manual
Page 106 highlights
Climate Adjusting air distribution individually - individual program Your settings are stored in this program. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Open "Climate". 3. Select "Vent settings" and press the controller. The driver's and front passenger side can be adjusted separately with the fields on the right or left side. 4. Select the driver's or front passenger side if necessary. Move the controller to the right or left repeatedly until the driver's side or front passenger side is selected. 5. Select the desired field by moving the controller. 6. Turn the controller to adjust the air distribution. Switching cooling function on and off The cooling function cools and dehumidifies the incoming air before reheating it as needed according to the temperature setting. This function is only available when the engine is running. The cooling function helps to avoid condensation on the window surfaces or to quickly remove them. Depending on the weather, the windshield may fog over briefly when the engine is started. The cooling function is switched on automatically with the AUTO program. Maximum cooling Maximally cooled air is obtained as quickly as possible at an outside temperature above approx. 327/ 06 and with the engine running. At the lowest temperature, the automatic climate control switches into recirculating air mode. The maximum air volume flows out of the vents for the upper body. It is therefore necessary for these vents to be open for maximum cooling. AUC Automatic recirculated-air control/recirculated-air mode Driver's side: 1 2 3 4 5 Air directed toward the windshield and side windows Air for the upper body Air to footwell Air for the upper body Air to footwell Pressing the AUTO button cancels the manual air distribution settings.< The automatic mode for the air volume remains effective with manual air distribution. You can respond to unpleasant odors or pollutants in the immediate environment by temporarily suspending the supply of outside air. The system then recirculates the air currently within the vehicle. In AUC mode, a sensor detects pollutants in the outside air and controls the shut-off automatically. Press the button repeatedly to run through the following control sequence: > LED off: outside air flows into the vehicle continuously. > Right LED on, AUC mode: the system detects pollutants in the outside air and responds by blocking the supply of outside air when required. Front passenger side: 104 Online Edition for Part no. 01 41 0 014 244 - © 08/07 BMW AG