2008 BMW M6 Owner's Manual - Page 46

Opening and closing Before installing 1. Remove the wind deflector from the protective sleeve and fold it open, refer to arrows 1. 3. Push the securing pin 3 on the left side into the appropriate opening until it snaps into place. 2. Press the upper and lower section together until the locking device engages, refer to arrow 2. 3. Push the securing pin 3 out until it engages. 4. Fold up the upper half 4 of the wind deflector. With wind deflector fitted: do not incline the front seat backrests too far backward if the seat is to be moved back to the end position. Otherwise, the wind deflector will be damaged.< Removing The same as installing, but in reverse order. Folding up 4. Unfold the rear mounts 4. Installing 1. Insert the securing pin 1 of the wind deflector into the appropriate opening on the right side of the vehicle. 1. Push the handle of the securing pin on the wind deflector on the left side of the vehicle all the way back and release the locking mechanism. 2. Fold in the upper and lower section. 2. Guide the rear mounts 2 into the receptacles provided. 44 Online Edition for Part no. 01 41 0 014 244 - © 08/07 BMW AG