1997 Chevrolet Cavalier Owner's Manual - Page 294

Care of Safety Belts Keep belts clean and dry. Cleaning the Outside of the Windshield and Wiper Blades If the windshield is not clear after using the windshield washer, or if the wiper blade chatters when running, wax, sap or other material may be on the blade or 'windshield. Clean the outside of the windshield with GM Windshield Cleaner, Bon Powder (non-scratching glass cleaning powder), GM Pr No. 1050011. The windshield clean if at is beads do not form when you rinse it with water. A m i @ I Do not bleach or dye safety belts. do, it If'you may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water. Check the wiper blades and clean them as necessary; Glass should be cleaned often. GM Glass Cleaner (GM replace blades that look worn. P r No. 1050427) or a liquid household glass cleaner at will remove normal tobacco smoke and dust on films Weatherstrips interior glass. Silicone grease on weatherstrips will make them last Don't use abrasive cleaners on glass, because they may longer, seal better, and not stick or squeak. Apply silicone cause scratches. Avoid placingdecals on the inside rear grease with a clean cloth at least every months. six window, since they may haveto be scrapedoff later. During very cold, damp weather more frequent If abrasive cleaners are used on inside of the rear the application may be required. (See "Recommended window, an electric defogger element may be damaged. Fluids and Lubricants" in the Index.) Any temporary license should not be attached across the defogger grid. Cleaning Glass Surfaces Grime from the windshield will stick to the wiper blades and affect their performance. Clean the blade by wiping vigorously with a cloth soaked in full-strength windshield washer solvent. Then rinse blade with water. the 6-52