1997 Chevrolet Cavalier Owner's Manual - Page 94

For a single wiper cycle, press the stalk down until the wipers start, then let go. The wipers will stop after one stalk cycle. For more cycles, hold the wiper down longer. For fixed delay wiper cycles, move the wiper switch to DELAY for wiper cycles witha fixed time delay between them. For steady wipercycles, move the wiper stalk up to either 1 or 2, depending on the wiper speed you want. Controlled Cycle Wipers Equipped) (If To turn wipersoff, move the stalk down to OFF. Remember that damaged wiper blades may prevent you from seeing well enough to drive safely.To avoid damage, be sure to clear ice and snow from the wiper blades before using them. I they're frozen to the windshield, carefully f loosen or thaw them. your blades do become damaged, If get new blades or blade inserts. Heavy snow or ice can overload your wipers. circuit A breaker will stop them until motor cools. Clear away the snow or ice to prevent an overload. If your vehicle has variable controlled-cycle windshield wipers, you can set the wiper speed a long or short for delay between wipes. This can be very useful in light rain or snow. Move the stalk to DELAY, then rotate the band to choose the delay you want.Rotate the band upfor shorter delay times between wiper cycles. Rotate the band down for longer delay times between wiper cycles. 2-36