2011 Chevrolet Equinox Owner's Manual - Page 15

In Brief To return the seatback to the upright position: 1. Lift the lever fully without applying pressure to the seatback, and the seatback will return to the upright position. 2. Push and pull on the seatback to make sure it is locked. Power Reclining Seatbacks 1-9 Memory Features turned off. These automatically stored positions are referred to as RKE Memory positions. Storing Button Memory Positions To save positions into Button Memory: 1. Adjust the driver seat, seatback recliner, and both outside mirrors to the desired driving positions. 2. Press and release the MEM (Memory) button. 3. Press "1" until a beep sounds. To adjust a power seatback, if available: . On vehicles with the memory feature, the "1" and "2" buttons on the outboard side of the driver seat are used to manually save and recall the driver seat and outside mirror positions. These manually stored positions are referred to as Button Memory positions. The vehicle will also automatically save driver seat and outside mirror positions to the current driver Remote Keyless Entry (RKE) transmitter when the ignition is 4. Repeat Steps 1 through 3 for a second driver using "2." To recall the manually saved Button Memory positions, press and hold "1" or "2." The driver seat and outside mirrors move to the positions stored to those buttons when pressed. Releasing "1" or "2" before the stored positions are reached stops the recall. To automatically recall RKE Memory positions, unlock the driver door with the RKE transmitter and open Tilt the top of the control rearward to recline. Tilt the top of the control forward to raise. .