2011 Chevrolet Equinox Owner's Manual - Page 322

10-36 Vehicle Care 5. Pull the bulb (B) straight out of the bulb socket. 6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install into lamp assembly. 7. Turn the lamp assembly into the liftgate engaging the clip side first. 8. Push on the lamp side opposite the clip until the lamp assembly snaps into place. Replacement Bulbs Exterior Lamp Back-Up Lamp Fog Lamp Front Headlamp High Beam Headlamp Low Beam License Plate Lamp Parking Lamp/Turn Signal Front Sidemarker Front and Rear Taillamp/Turn Signal Lamp/Stop Lamp Bulb Number 921LL H11 9005LL H11 168LL 7444NA 194LL 3157K A. Bulb Socket B. Bulb C. Lamp Assembly 4. Turn the bulb socket (A) counterclockwise to remove from lamp assembly (C). For replacement bulbs not listed here, contact your dealer.