2011 Chevrolet Equinox Owner's Manual - Page 316

10-30 Vehicle Care 2. Hold the wiper arm at the tip with one hand and hold the wiper blade at the tip with the other hand. 3. Pull down on the wiper blade. The blade will pull away from the arm. 5. Align the wiper blade with the arm and hold both ends of the arm while gently squeezing until the blade snaps into place. Do not apply excessive force during this operation. Reposition the blade in the arm and repeat, if blade is not correctly positioned. 6. Place the wiper arm with the wiper blade attached back on the liftgate glass. 2. Press the square button on the top side, at the end of the wiper arm, and pull the wiper blade out of the end of the wiper arm. 3. Install the wiper blade connector by sliding into the end of the wiper arm until the square button on the wiper blade clicks into place with the wiper arm. 4. Place the wiper arm with the wiper blade in place back on the windshield. Rear Wiper Blade Replacement To replace the rear wiper blade: 1. Lift the wiper arm from the liftgate glass until no further movement is possible. 4. Place the wiper blade into the wiper arm aligning the blade attachment rivet with the arm attachment.