2011 Chevrolet Equinox Owner's Manual - Page 205

Infotainment System using OnStar® Hands‐Free Calling, if available. Refer to the OnStar owner's guide for more information. The pairing process can be started by using the voice recognition system or the controls on the infotainment system. Pairing Information: . 7-49 To link to a different paired phone, see "Linking to a Different Phone" later in this section. Pairing a Phone 1. Press . 4. Start the pairing process on the cell phone that will be paired to the vehicle. Reference the cell phone manufacturer's user guide for information on this process. Locate the device named "Your Vehicle" in the list on the cell phone and follow the instructions on the cell phone to enter the four‐digit PIN number that was provided in Step 3. 5. The system prompts for a name for the phone. This name will be used to indicate which phone is connected. The system confirms the name. 6. The system responds with " has been successfully paired" after the pairing process is complete. 7. Repeat Steps 1 through 7 for additional phones to be paired. b / g. Up to five cell phones can be paired to the Bluetooth system. The pairing process is disabled when the vehicle is moving. The Bluetooth system links with the first available paired cell phone in the order the phone was paired. Only one paired cell phone can be connected to the Bluetooth system at a time. Pairing only needs to be completed once, unless the pairing information changes or the phone is deleted. For vehicles without a navigation system, the system responds "Ready," followed by a tone. For vehicles with a navigation system, the system responds with a tone. After the tone say "Hands Free." The system responds "Ready," followed by a tone. . . . . 2. Say "Bluetooth." The system responds "Bluetooth ready," followed by a tone. 3. Say "Pair." The system responds with instructions and a four‐digit Personal Identification Number (PIN). The PIN will be used in Step 4. .