2011 Chevrolet Equinox Owner's Manual - Page 58

3-4 Seats and Restraints . To adjust the seatback, see Reclining Seatbacks on page 3‑6. To adjust the lumbar support, see Lumbar Adjustment on page 3‑6. Eight‐Way Power Seats Raise or lower the entire seat by moving the entire control up or down. mirror positions. These manually stored positions are referred to as Button Memory positions. The vehicle will also automatically save driver seat and outside mirror positions to the current driver Remote Keyless Entry (RKE) transmitter when the ignition is turned off. These automatically stored positions are referred to as RKE Memory positions. See Remote Keyless Entry (RKE) System Operation on page 2‑3 for more information. Storing Button Memory Positions To save positions into Button Memory: To adjust the seatback, see Reclining Seatbacks on page 3‑6. To adjust the lumbar support, see Lumbar Adjustment on page 3‑6. Memory Seat and Mirrors To adjust a power seat, if equipped: . Move the seat forward or rearward by sliding the control forward or rearward. Raise or lower the front or rear part of the seat cushion by moving the front or rear of the control up or down. 1. Adjust the driver seat, seatback recliner, and both outside mirrors to the desired driving positions. On vehicles with the memory feature, the "1" and "2" buttons on the outboard side of the driver seat are used to manually save and recall the driver seat and outside 2. Press and release the MEM (Memory) button. 3. Press "1" until a beep sounds. 4. Repeat Steps 1 through 3 for a second driver using "2." .