2013 Chevrolet Avalanche Owner Manual - Page 123

Storage forward until the panel is fully seated against the Midgate. Then lower the rear of the cover to engage the striker pegs (A) to align with the striker assembly (B). 4-9 is not followed exactly, the cargo cover panels might not correctly lock in place. Push the driver side latch toward the front of the vehicle to lock the cover in position. A click sounds when each latch locks. Lock the remaining passenger side latch on panel 1. 4. Install cargo cover 2 followed by 3 next. Place the latches in the unlocked position. Place the cargo cover panel on the cargo area rails while holding the back of the cargo panel up. Driver Side Shown, Passenger Side Similar 2. Place the cover on the cargo box within 10 cm (4 in) of the Midgate and lower the rear of the panel within 5‐8 cm (2‐3 in) from the top of the cargo box. Push the cover forward making sure that the guide block engages the retainer bracket opening. Continue to push 3. The driver side cargo cover panel latch must lock in place before the passenger side latch can be locked. If this procedure