2013 Chevrolet Avalanche Owner Manual - Page 366

10-32 Vehicle Care To replace one of these bulbs: 1. Using a small flat-bladed tool, insert the blade end at the back edge of the rear license plate lamp housing (A). 2. Gently push forward while lifting the back edge of the lamp housing from the bumper opening. 3. Turn the bulb socket (C) one‐quarter turn to release the bulb socket from the lamp housing (A). 4. Pull the bulb (B) from the bulb socket (C). 5. Reverse the steps to install. 6. Press a new bulb into the bulb socket and insert the bulb socket into the taillamp assembly. Turn the bulb socket clockwise into the taillamp assembly until it clicks. 7. Reinstall the taillamp assembly making sure to line up the pins with the vehicle. Replacement Bulbs Exterior Lamp Back-up Lamp License Plate Lamp Rear Turn Signal Lamp, Taillamp, and Stoplamp Sidemarker Lamp Bulb Number 7441 168 3047K License Plate Lamp 194LL For replacement bulbs not listed here, contact your dealer. A. License Plate Lamp Housing B. Bulb C. Bulb Socket