2013 Chevrolet Avalanche Owner Manual - Page 405

Vehicle Care 10-71 WARNING (Continued) an emergency, a cloth or a paper towel can be used; however, use a scraper or wire brush later to remove all rust or dirt. Rear Position Rear Tire Flat: If the flat tire is on a rear tire of the vehicle, use the jack handle (B) and both jack handle extensions (C). Attach the wheel wrench (D) to the jack handle extensions (C). Attach the jack handle (B) to the jack (A). Use the jacking pad (E) provided on the rear axle. Turn the wheel wrench (D) clockwise to raise the vehicle. Raise the vehicle far enough off the ground so there is enough room for the spare tire to clear the ground. 5. Remove all the wheel nuts. 6. Take off the flat tire. { WARNING Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In (Continued) 7. Remove any rust or dirt from the wheel bolts, mounting surfaces, and spare wheel. 8. Install the spare tire.