2013 Chevrolet Avalanche Owner Manual - Page 181
2013 Chevrolet Avalanche Manual
Page 181 highlights
Instruments and Controls 2. Write down the 8 to 12 switch settings from left to right as follows: . 5-55 buttons to put the Universal Home Remote into programming mode. When a switch is in the up position, write "Left." When a switch is in the down position, write "Right." If a switch is set between the up and down position, write "Middle." The switch settings written down in Step 2 now become the button strokes to be entered into the Universal Home Remote in Step 4. Be sure to enter the switch settings written down in Step 2, in order from left to right, into the Universal Home Remote, when completing Step 4. Example of Eight Dip Switches with Three Positions The panel of switches might not appear exactly as they do in the examples above, but they should be similar. The switch positions on the hand-held transmitter could be labeled as follows: . . . A switch in the up position could be labeled as Up, +, or On. A switch in the down position could be labeled as Down, −, or Off. A switch in the middle position could be labeled as Middle, 0, or Neutral. A. Left Button (Up, +, or On) B. Middle Button (Middle, 0, or Neutral) C. Right Button (Down, −, or Off) 4. The indicator lights will blink slowly. Enter each switch setting from Step 2 into your vehicle's Universal Home Remote. You will have two and one-half minutes to complete Step 4. . . 3. From inside your vehicle, first firmly press all three buttons at the same time for about three seconds. Release the