2013 Chevrolet Avalanche Owner Manual - Page 302

9-44 Driving and Operating The system may be heard or felt while it is working; this is normal. StabiliTrak OFF light illuminates and the appropriate DIC message displays. This will also disable the TSC feature. Traction control and StabiliTrak can be turned on by pressing and releasing the TCS/StabiliTrak button if they are not automatically shut off for any other reason. This will also enable the TSC feature. When the TCS or StabiliTrak system is turned off, the StabiliTrak light and the appropriate message will be displayed on the DIC to warn the driver. The vehicle will still have brake-traction control when traction control is off, but will not be able to use the engine speed management system. See "Traction Control Operation" next for more information. When the TCS has been turned off, system noises may still be heard as a result of the brake-traction control coming on. If the system fails to turn on or activate, the StabiliTrak light along with a message will be displayed on the Driver Information Center (DIC). If a DIC message appears, make sure the StabiliTrak system has not been turned off using the Traction Control System (TCS)/StabiliTrak button. Then turn the vehicle off, wait 15 seconds, and then turn it back on again to reset the system. If any of the messages still appear on the DIC, the vehicle should be taken in for service. For more information on the DIC messages, see Ride Control System Messages on page 5‑39. The TCS/StabiliTrak button is located on the instrument panel. The traction control part of StabiliTrak can be turned off by pressing and releasing the TCS/ StabiliTrak button if both systems (traction control and StabiliTrak) were previously on. The StabiliTrak light will flash on the instrument panel cluster when the system or the TSC feature is both on and activated. To disable both TCS and StabiliTrak, press and hold the TCS/StabiliTrak button until the